Breeder Hen PROGENY MEAT YIELD Classification System
Categories to be Classed:
Killout Percentage
Dressout Percentage
Deboned Meat Weight
Fat Pan Thickness
Meat Grade
Note: A rating of Class 6 in any Category may result in a "Possible Disqualification".

Killout Percentage:
DEFINED: Killout percentage is the Hanging Carcass Weight of the bird expressed as a percentage of the Total Live Weight of the bird. Please see "Dressout Percentage" below for the proper Carcass Weight Standard.
| Class | Killout Percentage |
| Class #1: | 54% or More |
| Class #2: | 52% - <54% |
| Class #3: | 50% - <52% |
| Class #4: | 48% - <50% |
| Class #5: | 46% - <48% |
| Class #6: | Less than 46% |

Dressout Percentage:
DEFINED: Dressout percentage is the Deboned Meat Weight of the bird exppressed as a percentage of the Total Carcasss Weight of the bird using the Standards of Deboned Meat Weight & Carcass Weight.
CARCASS STANDARD: All fat trimmed off the carcass as reasonably as possible, Neck no longer than 6 inches ( 15 cm) in length, leg bones sawed no longer than 6 inches (15 cm) below the hock, rib cage, wings and tail left on carcass, breast plate removed.
| Class | Dressout Percentage |
| Class #1: | 70% or More |
| Class #2: | 65% - <70% |
| Class #3: | 60% - <65% |
| Class #4: | 55% - <60% |
| Class #5: | 50% - <55% |
| Class #6: | Less than 50% |

Deboned Meat Weight:
DEFINED: Deboned Meat Weight is the total weight of the Drum Muscle assembly without the leg bone, the Thigh muscle assembly without the Thigh bone and the Tenderloin (U.S. Chart) muscle.
DEBONED MEAT WEIGHT STANDARD: Silver/Blue skin left on the meat, Major Tendon ends removed. Not included in the weight are Rib Cage meat, Neck meat, Organ meat or Fat.
| Class | Kilograms | Pounds (approx.) |
| Class 1 | 45+ kgs | 99+ lbs |
| Class 2 | 40 to 45 kgs | 88 to 99 lbs |
| Class 3 | 35 to 40 kgs | 77 to 88 lbs |
| Class 4 | 30 to 35 kgs | 66 to 77 lbs |
| Class 5 | 25 to 30 kgs | 55 to 66 lbs |
| Class 6 | Less than 25 kgs | Less than 55 lbs |

Fat Pan Thickness:
DEFINED: The Fat Pan is located on the belly of the bird between the legs and towards the rear of the bird.
FAT PAN THICKNESS STANDARD: The thickness of the Fat Pan is measured vertically from a cut cross-section of the Fat Pan nearest the approximate center of the Fat Pan.
| Class | Fat Pan Thickness/Centimeters | Fat Pan Thickness/Inches (approx) |
| Class #1: | 2.5 - <5.0 cm | 1 - <2 inches |
| Class #2: | 5.0 - <7.6 cm | 2 - <3 inches |
| Class #3: | 7.6 - <10.2 cm | 3 - <4 inches |
| Class #4: | 10.2+ cm | 4+ inches |
| Class #5: | 1.25 - <2.5 cm | 0.5 - <1 inches |
| Class #6: | <1.25 cm | <0.5 inches |

Meat Grade:
DEFINED: The Meat Grade is determined using the:
MEAT GRADE STANDARD: The Meat Grade Classification rating is the percentage of total progeny slaughtered that have been graded as "PRIME Grade" when graded according to the standards of the BM Ostrich Carcass Grade & Yield System.
| Class | % of Progeny Grading PRIME |
| Class #1: | 100% |
| Class #2: | 98% - <100% |
| Class #3: | 96% - <98% |
| Class #4: | 94% - <96% |
| Class #5: | 92% - <94% |
| Class #6: | Less than 92% |

Last modified on Friday, June 07, 2002